MACHINE DIMENSIONS
Length 230”
Width 53"
Height 81"
Hopper Opening 28" W x 50" L
Shipping Weight 8,500 Lbs.
(Approximate)
BALE SIZE
(Approximate)
Length 72”
Width 30"
Height 36"
STRUCTURAL
Welded Frame of Heavily Re-enforced Channel and Plate
Adjustable Shear Bar
Adjustable Platen Hold-Down
Platen Assembly Moves on Low Friction, Long Wearing, Replaceable
Bearing Strips
Platen Guide Bars Full Length of Travel
Safety Hopper to Protect Personnel
Clam-Shell Door Design
Sand Blasted, Primed and Painted with Industrial Enamel
HYDRAULIC
Manifold Hydraulic System
JIC Standard Hydraulics Rated to 3,000 PSI
Reservoir Clean-Out Ports
Main Cylinder Bore 6", Stroke
63", Rod 4"
Door Cylinder Bore 4”, Stroke
8", Rod 1 ¾"
System Pressure 2,050 PSI
Total Force 57,900 Lbs.
Platen Pressure 54 PSI
Cycle Time (No Load) 20 Seconds
Reservoir Oil Capacity 80 Gallons
Door Lock Hydraulic
Gradual Release
ELECTRICAL
Auto Start Electronic Beam Operated Sensor
Completed Bale Alarm
Power on Beacon (Amber)
Main Motor 20 HP/1,800
RPM/460 Volt/3 Phase/60 Hz/TEFC/High Efficiency
Main Enclosure NEMA 12 Rated
Operators Controls Programmable
Controller
Control Circuit 120 volts
Control Switches Limit Switches
Wiring Identified at
both ends with oil-resistant markings; protected by rigid and
flexible conduit
PERFORMANCE
Bale Size Expanded 30" Wide x 36" High x
72” Long
Bale Volume Cubic Feet
Expanded (Approximate)
Cycle Time 20 Seconds
Capacity 5,114 Cubic
Feet Per Hour (No Load)
* Performance rates, bale weights, and bale densities are
subject to moisture content, material pre-bale densities, feed
rates and other variables in baling.
