Found 94 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
NEW Tuffman 12-Man Stationary Sorting Station - 64' long x 42" wide 12-man picking table with 12 sorting chutes (6 on each side), Tuffman standard infeed...
$109,000
NEW Tuffman 32' Heavy-Duty Incline Conveyor - This unit is a NEW Tuffman 32' belt over roller heavy-duty incline conveyor powered by a 20 hp 3-phase electric...
$42,000
NEW Tuffman 6-Man Stationary Sorting Station - 34' long x 42" wide 6-man picking table with 6 sorting chutes (3 on each side), two-ply 3/16" x 1/16" 220...
$69,500
NEW Tuffman 8-Man HD-P Portable Sorting Station - 32' long x 42" wide 8-man portable picking table with 8 sorting chutes (4 on each side), infeed hopper...
$67,700
NEW Tuffman 8-Man Stationary Sorting Station - 44' long x 42" wide 8-man picking table with 8 sorting chutes (4 on each side), Tuffman standard infeed...
$78,500
NEW Tuffman 12' Portable Incline Conveyor - 12' long x 48" wide, powered by an electric motor. Also equipped with cleated belt and 5' wide hopper, casters,...
$13,800
NEW Tuffman CBS 24 Crossbelt Magnet - powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty cleated rubber. Maximum belt speed...
$9,300
NEW Tuffman CBS 30 Crossbelt Magnet - powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty cleated rubber. Maximum belt speed...
$9,800
NEW Tuffman CBS 36 Crossbelt Magnet - powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty cleated rubber. Maximum belt speed...
$10,400
NEW Tuffman CBS 48 Crossbelt Magnet - powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty cleated rubber. Maximum belt speed...
$11,800
NEW Tuffman CBS 60 Crossbelt Magnet - powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty cleated rubber. Maximum belt speed...
$13,500
10' Slider Bed Conveyor - 10' long x 16" wide, powered by a 1/3 hp, single-phase electric motor and comes equipped with a 12" wide belt.
$950
10' Slider Bed Conveyor - 10' long x 16" wide, powered by a 1/3 hp, 208-230/460 V, 3-phase electric motor and comes equipped with a 12" wide belt.
$850
100 hp Electric Motor - General Electric Custom 8000 induction motor. 100 hp, 1180 rpm, 550 V, 60 hz, 8143 frame and 98 full load amps.
$1,500
12' Incline Conveyor - powered by a 3-phase electric motor. 9' long incline portion and 3'-3" long on horizontal section x 36" wide. Belt is 20" wide....
$3,850
14' Incline Case Conveyor (with Pivoting Incline Sections) - 14' long x 20" wide, powered by a 1 hp, 230/460 V, 3-phase electric drive motor. It is equipped...
$3,300
14' Incline Conveyor - 14' long, 18 1/2" wide, 16" wide belt. Powered by a 1/2 hp, 115/230 V, single-phase Century motor.
$2,450
15 hp Blower - powered by a 15 hp, 1760 rpm electric motor. It is 24" in diameter with an outlet of 26" x 16" and an inlet of 22" diameter.
$1,750
15 hp Blower - powered by a 15 hp, 220/440 V, 1745 rpm, 3-phase General Electric electric motor. The inlet is 16" in diameter with an outlet of 18" x 9",...
$3,700
15' Auger - 15' long x 13" diameter, powered by a 1/2 hp electric motor.
$3,500
15' Incline Conveyor with Cleated Belt - 15' long x 24" wide. Powered by a 1.5 hp, 240/460 V, 3-phase electric motor. 24" wide heavy-duty belting with...
$5,800
150 hp Electric Motor - Ajax Electric Motor Corp. Model AE-150-1200 continuous-duty electric motor, 150 hp, 230/460 volts, 1185 rpm.
$1,800
18' Incline Conveyor - 18'6" long covered conveyor powered by a 3 hp, 208-230/460 V, 3-phase electric motor. It is equipped with a 25" belt with 2" cleats...
$9,800
18' Incline Conveyor - 18' long x 33" wide. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 29 1/2" belt. 10" side skirting. Discharge height...
$3,400
18' Incline Conveyor - 18' long x 33" wide. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 4" side skirting. Good condition.
$3,800
20 x 80 Stainless Steel Conveyor with Vibrating Chute - Eriez stainless steel conveyor powered by a 1/2 hp, 208-230/480 V, 3-phase Leeson gear motor with...
$4,800
No Thumbnail
Available.
Available.
20' long x 30" wide Incline Conveyor with 3 ply heavy duty belting, legged head pulley and tail pulley, hydraulic power, feed hopper. Good condition.
$9,800
20' Incline Conveyor - 20' long x 42" wide incline conveyor. 36" wide rough top belting, powered by 2 hp, 230 V, 3-phase electric motor. Good condition.
$4,800
25 hp Electric Motor - SEW Eurodrive continuous-duty motor is C-faced, 25 hp, 230/460 V, 1752 rpm, type RF102DV180M.
$750
25 hp Electric Motor - SM-Cyclo continuous-duty motor. C-faced, 25 hp, 230/460 V, 60 hz, 1770 rpm, frame G180M.
$750
3-Belt Conveyor - powered by a 1.5 hp, 230/460 V electric motor. It is equipped with 3 - 7" wide conveyor belts. 1 belt is 11' long and 2 are 15'9" long.
$5,600
3" Galvanized Steel Pipe - This is a large lot (700' available) of 3" galvanized steel (ID) water pipe with saddle-joint (non-threaded) ends. Majority...
$3,800
40 hp Blower - powered by a 40 hp, 240/460 V, 3-phase electric motor. Side outlet is 18 1/2" diameter, top outlet is 16 1/4" diameter. Fan blades are 14"...
$3,450
5' x 24" Conveyor - 5' long x 24" wide EMI Corp. conveyor, powered by a 1/2 hp, 3-phase electric motor.
$2,250
650 kW Wood-Fired Power Plant - wood-fired, steam-generating power plant complete with all buildings, one 600 hp, 300 lb. rated hybrid boiler (water-tube...
$295,000
7' Screw Auger - 7' long x 10" diameter, powered by a 1 hp electric motor, equipped with an infeed spout.
$3,400
70' Indirect Fire Municipal Solid Waste Dryer with Vapor Recovery Unit - includes one 70' cor-ten rotary dryer, combustion chamber with new burners designed...
$2,350,000
8' Matthews Incline Conveyor - 8' long x 20" wide incline conveyor with 3" side rails, powered by a 1/2 hp, 220/480 V, 3-phase electric motor. Like new...
$2,750
8' Screw Auger - 8' long x 10" diameter, powered by a 1 hp electric motor. Comes equipped with an infeed spout.
$3,400
AAF - Arrestall Baghouse/Dust Collection System - self-contained dust arrester. 3200 CFM. Complete system with fans, motors (480 V, 3-phase), controls,...
$6,800
Alsteele Granulator Knives - brand new knives for Alsteele Model 1018, 1218 or 1119 granulators. Includes 2 fly knives and 2 bed knives - 17.985" long....
$400
Alvey 12 x 16 Conveyor - 12' long x 16" wide belt conveyor, powered by a 1/2 hp, 3-phase electric motor. Comes with controls. Good condition.
$2,300
Blackmer Model X3E Pump - skid-mounted pump powered by a 10 hp, 1765 rpm, 208-230/460 V, 3-phase electric motor with a Dodge DR 200A speed reducer. Capacity...
$14,500
Blower Application Model 25-4 Blower - powered by a 15 hp, 208-230/460 V, 1765 rpm, 42.2-39.2/19.6 amp electric motors. Equipped with on/off switch. Good...
$1,950
Broce Model RJ350 8' Broom Sweeper powered by a John Deere 404DF150B Engine; 4 cylinder engine, NEW 8' wide broom, controls, good tires, only 3000 hours.
$14,800
Burner & Blower - The blower is a General Combustion Model FP-86-O powered by a 50 hp, 230/460 V, 3-phase electric motor. Equipped with a Combotronic ignition...
$22,700
CECO Fiber Bed Mist Collector - Model DLM, 42" diameter, 205" high and constructed with stainless steel. Equipped with explosion-proof doors and has a...
$15,000
CECO Fiber Bed Mist Collector - 28" diameter, 100" high and constructed from carbon steel. Also equipped with explosion-proof doors and has a flow rate...
$13,500
Champion Products Model 1800 Blower - powered by a 20 hp, 208-230/460 V, 3-phase electric motor. The side outlet is 14" diameter, top outlet is 18" long...
$3,250
Cincinatti Model RBE-17 Fan - powered by a 30 hp, 208-230/460 V, 78-72/36 amp, 3-phase electric motor.
$3,800
Complete Wire Chopping Line - can process 500-800 lbs per hour and includes one refurbished 25 hp heavy-duty granulator with one new separation system...
$87,500
Conveyor Drive Unit - powered by a 2 hp, 3-phase electric motor. It has a 19" long x 12" diameter head pulley and a shaft-mounted Dodge 25:1 gear reducer.
$1,250
Corwell Model 262-BLO Blower - powered by a 20 hp, 230/460 V, 1755 rpm 51.0/25.5 amps, electic motor with on/off switch. Good Condition.
$1,950
Cotta Transmission - unit is a Cotto Model GR200-5 single-speed transmission, SN 168814. The tag shows a stamp of GR975200. This transmission was taken...
$6,800
Custom Equipment Hybrid 1030 Scissor Lift - lifts 750 pounds. Side-out deck extension with slip-resistant surface. Non-marking tires, 10' working height,...
$5,900
Custom Equipment Hybrid 1030 Scissor Lift - lifts 750 pounds. Side-out deck extension with slip-resistant surface. Non-marking tires, 10' working height,...
$5,900
ECO Flock 1000 System with Curing Tunnel - consists of a 3 steel roller distribution system. There are 2 flocking sieves and 4 collecting drawers for flocking...
$19,750
Filter Press - 10' long filter press equipped with 45 - 24" plates.
$15,000
Granite Environmental Model SS-48 Oil Drum Skimmer with Drum Head - powered by a hydraulic-driven Von Ruden motor with a 1 hp Delta power hydraulic pack....
$29,500
Green Heck Model SWB-22S Blower - powered by a 1/2 hp, 208-230/460 V, electric motor. On/off switch, good condition.
$1,650
Gruendler 12 x 12 Delumper - powered by a 15 hp, 230/460 V, 1765 rpm electric motor. It has a 12" x 12" feed opening, 1" screen and stainless steel housing.
$7,500
HAMM Raco Model R350 Soil Stabilizer - with hydro statically driven milling and mixing rotor. Powered by a 490 hp Deutz diesel water-cooled engine, 8 cylinders,...
$165,000
Hauck WHG 120B Hugger Gas Burner -
HIGH FIRE:
Max Input @ 10% Excess Air (Btu/Hr): 660,000; Max Air Flow @ 16 osig (scfh): 6,820; Min. Input @ Max. Air...
$1,685
Haybuster IG 11 Spare Parts - includes 40 sets of 1 and 2 single hammers, 22 shafts, 6 screens with 4" holes, 2 screens with 2" holes, 1 belt roller, 1...
$4,800
Heavy-Duty Rotary Valve/Feeder - air lock valve/feeder has an inside diameter of 17 1/2" and an outside diameter of 25". It is powered by a chain-driven...
$11,700
Heil 24' Triple Pass Dryer - 24' long x 8' diameter dryer with a 12' long x 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
JLG Model 2030 - 20' Scissor Lift - 26' working height, 20' deck height. Non-marking tires and extendable deck 24v with batteries and built-in charger....
$8,800
Mac Saturn 52x40 Shredder Components - Major components of a Mac Saturn 52 x 40 slow-speed, high-torque shredder. It includes a 52" x 46" shredder cutting...
$4,800
Material Transfer Bulk Bag Filling System - Material Master 5353-AF bulk bagging system that comes equipped with a Salina Vortex Quantum Model GRA10-F-S4...
$14,500
MetalFab Model PB8-750 Posibin Hopper - combination 750-cubic-foot bin with an 8' diameter bin activator. Carbon steel construction. It is equipped with...
$12,500
MicroAir Clean Air Systems Model RP8-2 Dust Collector - powered by a 30 hp, 208-230/460 V, 74-68/34 amp, 3-phase electric motor. Typically 5,000-10,000...
$7,800
Mission Magnum Pump - skid-mounted pump powered by a 75 hp, 230/460 V, 1765 rpm, 3-phase electric motor. 13" open impeller, size 4 x 3 x 13, with explosion-proof...
$19,800
New London Engineering Model 500 Incline Conveyor - 6' long x 8" wide, powered by a 1/2 hp, 208-230/460 V electric motor with a standard speed of 60 rpm....
$1,500
Novatec Vacuum Power Unit with Cyclone - Model VPU-15, powered by a 15 hp electric motor. Equipped with a Universal RAI blower and cyclone. 3" diameter...
$6,750
Oil/Water Separator Tank - large 54" fiberglass cylinder with 20" funnel cone. Stand-mounted with lid. 74" across, holds 1130 U.S. gallons. Made by Edwards...
$3,850
Oil/Water Separator Tank - small 52" fiberglass cylinder with 10" funnel cone, stand-mounted with NO lid. 18" across, hold 61 U.S. gallons. Made by Edwards...
$1,970
Oil/Water Separator Tank - large 6' tall fiberglass cylinder with NO lid. 6' across, holds 1322 U.S. gallons. Made by Edwards Fiberglass, Inc. (EFI)
$3,100
Oil/Water Separator Tank - medium 48" fiberglass cylinder with 18" funnel cone, stand-mounted with lid. 36" across, holds 238 U.S. gallons. Made by Edwards...
$2,300
Paddle Conveyor - 13 1/2' long x 26" wide, powered by a 10 hp electric motor. Good condition.
$3,970
Powerscreen Mark II 28' Incline Conveyor - 27'8" long x 26" wide with 13' to 16' discharge height. 18" belt with side skirting. Equipped with feed hopper...
$14,500
Powerscreen Model Mark II 44' Incline Conveyor - 44' long x 35" wide with 13' to 16' discharge height. 24" belt with side skirting. Equipped with feed...
$16,500
Prodeva Model 250 Can and Glass Crusher - powered by a 5 hp, 230/460 V, 3-phase electric motor. Equipped with infeed hopper and controls. Crushes glass...
$6,700
Shar Systems 5 hp Mixer - Model DSCGK-50TNLFZ single-shaft mixer powered by a 5 hp, 230/460 V electric motor. 1/4 cubic yard capacity. Previously used...
$3,750
Shred-Pax AZ80 Shaft - keyed shaft is 7'1" long for a Shred-Pax AZ 80 shredder with a 32" x 62" cutting chamber. It is 4.5" in diameter with a 60" hexagon...
$3,850
Skako Model 50E 60 Vibrating Table - powered by a 300 V, single-phase electric motor. Vibrating table is 60" x 60", 38" x 45" inside the trough on the...
$3,500
Slider Bed Conveyor - 10'6" long x 12" wide, powered by a 1/3 hp, 115 V, single-phase electric motor. Equipped with a 10" wide belt.
$900
Surge Hopper - approximately 2.5 cubic yards. The bin is 40" long x 42" wide x 72" deep with a 43-1/2" long x 8" wide discharge.
$6,500
Tech-Air, Inc. Rotary Valve - Model 12 ROTO SEAL S.F. Powered by a 3/4 hp, 208-230/460-480 V electric motor. Openings are 12" x 12", and 12" in diameter.
$4,250
Transcraft Model DTX-18-44 53' Drop Deck Trailer - 41' lower deck and 12' upper deck with spread axles. Good condition.
$12,700
Tranter Superchanger Heat Exchanger - Model UFX-26-5-HP-44, serial number SC17152. 137 square foot surface area. Plate material is 304SS, 0.5mm thick,...
$6,500
Tuffman Can Densifier - powered by a 5 hp, 110 V, single-phase electric motor. Produces 28-30 lb bales in 3-4 minutes. Crushes whole or pre-crushed cans....
$14,950
Versa Ferguson Incline Conveyor - 6' long x 8" wide rubber-sidewall incline conveyor. 5" wide without the sidewalls. It is powered by a 1/3 hp, single-phase...
$2,700
Weinman Model 4L1W Pump - split-case, horizontal-mounted pump, Model 4L1W-100-P26G-D. Powered by a 10 hp, 230/460 V, 1170 rpm, 3-phase electric motor. It...
$20,000
Whitlock Model 660 Blender - tri-component blender equipped with hopper/loader and controls. Powered by a single-phase electric motor. Material is loaded...
$4,300