Found 48 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,300
This unit is a Tuffman CBS 30" permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$10,400
This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with cleats...
$11,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$13,500
This unit is a Tuffman Model 722-P Portable trommel screen powered by a hydraulic drive motor driven by a diesel engine. Trommel barrel is 22' long x 7'...
$88,000
This heavy-duty portable grinder is powered by an 880-hp Cat 3412 diesel engine, turbo-charged, and comes equipped with electric start, radio remote control,...
$169,000
CMI Maxigrind Model 460 G Portable Horizontal Grinder- powered by a CAT 3406- 480hp Turbo charged diesel engine.Includes cab with controls, knukleboom...
$79,000
This unit is a Cotto Model GR200-5 single-speed transmission, SN 168814. The tag shows a stamp of GR975200. This transmission was taken out of a Morbark...
$6,800
This Cresswood wood grinder is powered by a 100 hp. 230/460 volt, 22.6-11.3 amp, three phase electric motor. Grinding head diameter is 16" and 60" length....
$29,500
This unit is a 2002 Diamond Z Model 1460BL-11 tub grinder powered by a 1000-hp Cat diesel engine. It comes equipped with a self-contained grapple/loader...
$247,500
This grinder is powered by two (2) 200-hp, 460 volts, three-phase electric motors and is 6' in diameter. Hopper opening is 82" tall x 70" wide. Can process...
$33,500
Eldan Rasper Model 1200-1 shredder. Powered by a 120, 460V, 120 hp 3-phase electric motor, Infeed feed hopper, stand, controls, 12 flying knives, 3 static...
$84,500
This vacuum separator assures a complete and accurate product density classification from the very lightest to the very heaviest.Easily adjustable divider...
$22,000
This screen is 60" x 84" with a 5-hp motor. Adjustable feed hopper assures consistent supply of product onto screen.the unit is a positive eccentric, high...
$46,000
This destoner separates dry material into specific weight fractions by a high speed eccentric deck motion and air being drawn through a presized screen.It...
$15,000
This lot of Haybuster IG 11 spare parts includes 40 - sets of 2 and 1 single hammers, 22- shafts, 6 - screens with 4 inch holes, 2 - screens with 2 inch...
$4,800
This is a spare hammermill for a Haybuster Model 1100 tub grinder. The hammermill has eighty-eight 3/8" swing hammers. Hammers are reversible. Rod-mounted...
$4,400
Haybuster Model HD-8 Tub Grinder powered by a John Deere 110 HP 4 cylinder Turbo diesel engine, 8' tub with swinging hammers, 15' discharge conveyor, controls,...
$33,550
Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
This system includes a Jeffrey Model 56WBH hog/shredder powered by a 400-hp electric motor, 480v/3-phase; horizontal feed system; pull down; heavy hooked...
$68,000
This track-mounted slow-speed/dual-shaft shredder is powered by a Cat C18 diesel engine. Also equipped with a 6'-7" wide x 9'-2" long hopper, a crossbelt...
$450,000
Lindig Model 3B9 portable soil shredder has a 8 hp Briggs and Stratton gas motor, with new centrifugal clutch and belt.18" x 21" hopper opening with 36...
$4,450
This hammermill/shredder is powered by a 100 to 250-hp electric motor and comes equipped with a 30" x 40" infeed opening. Hopper and stand to be fabricated...
$65,000
This unit is a Material Master 5353-AF bulk bagging system that comes equipped with a Salina Vortex Quantum Model GRA10-F-S4 orifice gate vale and a Rice...
$14,500
This Miller Pulverizer is powered by a 150-hp, direct-drive, three-phase General Electric electric motor. Comes with a double-angled feed hopper. Great...
$28,000
This Miller Pulverizer is powered by a 150-hp, 480 volt, three-phase electric motor. Infeed opening is 19" long x 12" wide. Comes with a 1/2" screen.
$28,000
This 22" chiparvestor is powered by a recently overhauled Cummins KTA650 diesel engine.It is equipped with new anvil, set of knives installed and two new...
$92,500
This Morbark Waste Recycler comes equipped with 50 carbide disposable knives, discharge chute, and controls. Infeed hopper is 8' X 8' X 12' long, with...
$22,500
This unit is powered by a 650-hp Cummins diesel engine and comes equipped with grapple and controls. Recently serviced - new twin disc clutch assembly...
$48,000
This Morbark Waste Recycleris powered by a 650-hp Cummins diesel engine and comes equipped with loader with grapple. Cab with controls. Fairly new chipper...
$54,000
This is a 2003 Peterson Pacific 7400A horizontal grinder in good operating condition with many new parts, including a new head gasket in 2006. Other...
$245,000
This is a 1996 Peterson Pacific HC3400 horizontal grinder powered by a 425-hp Cat 3406C diesel engine. Includes hydraulic ram infeed. There are only...
$167,500
This Portec Model 1042 tumble grinder is powered by a 410-hp Cat 3408 eight-cylinder diesel engine. This grinder has more than 200 square feet of pre-screening...
$72,000
Proto Grind Model 1200 Portable Horizontal Grinder- Powered by a 425-hp Cummins diesel engine with the powerful Rot Drive System: hydraulically driven,...
$78,500
This unit is a Rotochopper Model EC-156 horizontal grinder powered by a 300-hp three phase electric motor. Includes 26" diameter X 56" wide rotor, feed...
$69,500
This unit is powered by a 40-hp Kubota V2203 diesel engine. Windrows up to 12' wide x 5' high in a two-pass operation. 6' wide x 7' high elevating face,...
$65,000
This unit is powered by a 95-hp Cat diesel engine. 9' x 7' elevating face. Remote controls allow for operation from cab. Material Handling, Tub Grinders, Waste...
$85,000
This unit is a Scat Model 4932 compost turner powered by a 140-hp Cat diesel engine with a 10' x 10' elevating face. Material Handling, Tub Grinders, Waste...
$55,000
This unit is a Stearns 30" DC lifting scrap magnet - 230 V.D.C., 15.5 amps. Harness and chains included. Good condition.
$7,800
This unit is a portable whole tree chipper powered by a 475-hp Cat diesel engine. Comes equipped with knuckleboom loader.
$78,000
This Vermeer TG400 tub grinder screen has 6" round holes. One unit available.
$950
This unit is powered by a300-hp Cat diesel engine and comes equipped with 10' tilt tub, discharge conveyor with magnetic head pulley, new hammers. Applications...
$89,000
This unit is a 7'x18' windrow, self propelled, powered by a 425-hp diesel engine. 4500 tons per hour capacity, 45 feet per minute, four wheel drive. ...
$120,000
This unit is in great condition with no repairs needed! Powered by anew John Deere diesel engine with less than 50 hours. This unit can be used for all...
$47,500
This unit is in good condition and is powered by a John Deere dieselengine. Less than 50 hours on new engine, newcontrols. Material Handling, Tub Grinders, Waste...
$44,000
This unit is in excellent shape, no repairs needed! Powered by a250-hp Cat 3208 diesel engine. Low hours,used for turning yard waste compost. Can be...
$60,000
This Hammermill is powered by a 50-hp electric motor and comes equipped with a 42"x24" infeed opening, swinging hammers, feed hopper and stand.
$29,500