Found 92 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
This is a Tuffman "Mini" 3-man sorting system: 20' long x 32" wide picking table with three 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$18,350
This is a Tuffman "Mini" 4-man sorting system: 25' long x 32" wide picking table with four 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$19,850
This is a Tuffman 12-man sorting system. 64' long x 42" wide 12-man picking table with 12 sorting chutes (6 on each side), Tuffman standard infeed conveyor,...
$109,000
This is a NEW Tuffman 6-man sorting system. 34' long x 42" wide 6-man picking table with 6 sorting chutes (3 on each side), two-ply 3/16" x 1/16" 220 PIW...
$69,500
This is a Tuffman 8-man HD-P portable sorting system. 32' long x 42" wide 8-man portable picking table with 8 sorting chutes (4 on each side), infeed hopper...
$57,700
This is a Tuffman 8-man sorting system. 44' long x 42" wide 8-man picking table with 8 sorting chutes (4 on each side), Tuffman standard infeed conveyor,...
$78,500
This unit is a Tuffman Can Densifier powered by a 5 hp, 110 V, single-phase electric motor. Produces 28-30 lb bales in 3-4 minutes. Crushes whole or pre-crushed...
$14,950
This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with cleats...
$11,800
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, single-phase electric motor and comes equipped with a 12" wide belt.
$950
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, 208-230/460 V, 3-phase electric motor and comes equipped with a 12" wide belt.
$850
20' x 36" Rotary kiln mount on a dual axle trailer.Include burner with blower.Infeed hopper, controls.Excellent for drying soil, sands salt, gravel/rocks,...
$59,500
Barber Green Rotary Kiln with dryer; 24' long X 7' diameter rotary kiln with refractory brick lining and flightings, drive mechanism with trunions and...
$68,000
24' Didion Rotary Media Drum - Kiln is 24' long x 6' OD with a drive mechanism including rollers and trunnion and comes with a 7.5 hp, 230/460 volt, three-phase...
$52,500
One used Rotary Kiln with Burner and Blower. 24' long x 66" diameter rotary kiln with steel flights with 25 MMBtu Hauck Beta burner with 25 hp blower....
$124,000
24' long x 66" diameter rotary kiln with steel flighting and 36" disc cone deflector. Large infeed is 52" opening and discharge is 9" x 9". 2 Allis Chalmers...
$84,000
This is a large lot (1000' available) of 3" galvanized steel (ID) water pipe with saddle-joint (non-threaded) ends. Majority of pipe is in 21' long sticks...
$3,800
Rotary Drum Drying Tunnel with Heat Chamber - 40' long x 7' diameter rotary klin with gas fired heat chamber. Klin is 40' long x 7' diameter with internal...
$114,500
48' long x 9' diameter rotary kiln. Carbon steel kiln with 10 1/2" flights and discharge chutes. Includes drive mechanism with 4 heavy duty trunions and...
$174,000
Wood-fired steam generating power plant complete with all buildings, one 600-hp 300-lb. rated hybrid boiler (water-tube with fire-tube). System has auto...
$295,000
This unit is a 70' Indirect Fire Municipal Solid Waste (MSW) Dryer with Vapor Recovery Unit that includes one 70' cor-ten rotary dryer, combustion chamber...
$2,350,000
The 70' Indirect Thermal Distortion Unit was purpose build for tire pyrolysis and is capable of processing up to 80 ton of tires per day. The system distills...
$2,750,000
Matthews 8' long x 20" wide incline conveyor with 3" side rails, powered by a 1/2-hp, 220/480 volt, three-phase electric motor. Like new - never been used!...
$2,750
AAF Fabri-Pulse Model 4-420-1000 Dust Collector. Design M. Construction materials - 12 gauge, H.R.S. ASTM-A570 steel, 420 - 4' bags with a combined surface...
$8,800
AAF Fabri-Pulse Model 4-420-1000 Dust Collector. Design M. Construction materials - 12 gauge, H.R.S. ASTM-A570 steel, 420 - 4' bags with a combined surface...
$8,800
This air-cooled exchanger is powered by a 10-hp, 1800 rpm, 230/400/460 volt electric motor. MAWP 100 PSI @ 35 (degrees F). Temperature in - 220 (degrees...
$12,800
Al-Jon Model 20 Poprtable Car crusher- powered by a Detroit Model 471 diesel engine and comes equipped with controls, new seals recently installed and...
$28,500
Alfa Laval Model NX418B-11G stainless steel three-phase solid bowl decanter centrifuge. Rated at 150 gallons per minute. Three phase to allow speratation...
$124,000
Barber-Greene Model 750 Portable Twin Shaft Pugmill. Powered by a 100hp, 460 v, 3 phase electric motor, twin shaft, 12'x36" wide discharge conveyor, mounted...
$38,500
This skid-mounted pump is powered by a 10-hp, 1765 rpm, 208-230/460 volt, three-phase electric motor with a Dodge DR 200A speed reducer. Capacity of 150...
$14,500
One used BloApCo Model 3CAXS-3058H shredder powered by a 30 hp, 230/460v, 3 phase electric motor, with infeed conveyor- 62" wide x 78" long with 54" wide...
$18,500
This can flattener's crushing mechanism is powered by a 7.5-hp, 230/460 volt, three-phase electric motors. The Chicago blower is powered by a 10-hp, 230/460...
$7,900
Carpco AFS-1010 system is designed to separate plastics from metal that are stockpiled or land filled. The principle utilized in this process is commonly...
$450,000
This CECO fiber bed mist collector is a Model DLM and is approximately 42" diameter, 205" high, and is constructed with stainless steel. It is also equipped...
$15,000
This CECO fiber bed mist collector is approximately 28" diameter, 100" high, and is constructed from carbon steel. It is also equipped with explosion-proof...
$13,500
This system is a used Cedarapids Model 64MT Portable Thermal Desorption System in good condition. Components include: primary chamber Cedarapids 24'x64"...
$790,000
This complete wire chopping line can process 500-800 lbs. per hour and includes one refurbished 25-hp heavy-duty granulator with one new separation system...
$64,900
WWR Model 9136 (36" Unit with 16" support legs) ECS Rare Earth Two Pulley Eddy Current Separator, Rare Earth 7" diameter rotor encased within an extra...
$96,500
This grinder is powered by two (2) 200-hp, 460 volts, three-phase electric motors and is 6' in diameter. Hopper opening is 82" tall x 70" wide. Can process...
$33,500
This unit is a Eidal Model 62x41 low speed/high torque shredder powered by a 200-hp, 480 volt, three-phase electric motor and comes equipped with a 62"...
$194,500
Eidal Model 72 X 41 slow speed-high torque shredder, equipped with at KYB 525S hydraulic pack with Dension pumps and a powered by two (2) 75 hp, 230/460...
$99,500
Eidal Model 72 X 41 slow-speed high-torque shredder, equipped with a KYB 525S hydraulic pack with Denison pumps and a powered by two (2) 75 hp, 230/460...
$127,500
Compactor with 60" X 26" hydraulic RAM.Feed opening is 42" X 42". Chamber opening is 61" X 36". Needs power pack. Make Offer!
MAKE OFFER
EZ Model A+ Portable Car Crusher powered by a John Deer diesel engine, 10" bore cylinders (no leaks0, 4" rod shaft, straight walls, opening is 20' long...
$79,000
This 10' filter press is equipped with 24" plates. There are 45 plates.
$15,000
This Granite Environmental Model SS-48 oil drum skimmer with drum head is powered by a hydraulic-driven Von Ruden motor with a 1-hp Delta power hydraulic...
$29,500
This unit is powered by a 15-hp, 230/460 volt, 1765 rpm electric motor. It has a 12" x 12" feed opening, 1" screen, and stainless steel housing.
$7,500
This horizontal-feed shredder is powered by a 60-hp electric motor and comes equipped with a 36" wide x 4-1/2" high infeed and a 2" screen. Applications...
$9,500
This unit is a Hardinge rotary cooler or dryer, horizontal, mild carbon steel, 10' diameter x 100' long. Falk enclosed gear drive, Model 35C2-02A8, 75-hp,...
$125,000
This heavy-duty rotary air lock valve/feeder has an inside diameter of 17-1/2" and an outside diameter of 25". It is powered by a chain-driven electric...
$11,700
Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
Indirect Fire Thermal Desorption System includes Metso Holo Flight Thermal Desorption Unit.This quadruple Holo-Flight, indirect-fire thermal desorption...
$775,000
Industrial Air Products (IAP) 40 HP Blower powered by a Balador 40 HP, 460 V, 50 amp, three-phase electric motor. Stand assembly. Good condition.
$7,800
This Lundell 850 Densifier/Pelletizer is powered by a 150-hp electric motor (460 volts, 3-phase), multiple power band belt. height is 86" x 75" width...
$88,500
Mac Saturn 62 x 40 slow speed-high torque shredder with one 525 Hydrostar motor powered by two 150-hp, 230/460 volts, 3 phase electric motors. Throat...
$69,750
This Posibin dump hopper is a combination 750-cubic-foot bin with an 8' diameter bin activator. Carbon steel construction. It is equipped with a 3-hp...
$12,500
Metso Holo Flite Quadruple Processor is an indirect heat exchanger for heating, cooling, and drying bulk solids, filter cakes, paste or sludges. Individual...
$335,000
This skid-mounted pump is powered by a 75-hp, 1765 rpm, 230/460 volt, three-phase electric motor. 13" open impeller, size 4x3x13, with explosion-proof...
$19,800
This Morbark Waste Recycleris powered by a 650-hp Cummins diesel engine and comes equipped with loader with grapple. Cab with controls. Fairly new chipper...
$54,000
This oil/water separator tank is one large 54" fiberglass cylinder with 20" funnel cone, stand-mounted with lid. 74" across = 1130 U.S. gallons. Made by...
$3,850
This oil/water separator tank is one small 52" fiberglass cylinder with 10" funnel cone, stand-mounted with NO lid. 18" across = 61 U.S. gallons. Made...
$1,970
This oil/water separator tank is one large 6' tall fiberglass cylinder with NO lid. 6' across = 1322 U.S. gallons. Made by EFI Edwards Fiberglass, Inc.
$3,100
This oil/water separator tank is one medium 48" fiberglass cylinder with 18" funnel cone, stand-mounted with lid. 36" across = 238 U.S. gallons. Made by...
$2,300
This unit is a portable soil remediation system that includes one calcine chamber (fluidized bed incinerator) with nine burners to provide 4.6 MBTU/hr....
$785,000
This unit is a portable soil remediation system that includes one calcine chamber (fluidized bed incinerator) with nine burners to provide 4.6 MMbtu/hr,...
$985,000
This unit is a Prodeva Model 250 can and glass crusher powered by a 5-hp, 230/460 volt, three-phase electric motor. In-feed hopper, controls. Crushes glass...
$6,700
Proto Grind Model 1200 Portable Horizontal Grinder- Powered by a 425-hp Cummins diesel engine with the powerful Rot Drive System: hydraulically driven,...
$78,500
This unit is a 30' long x 6' diameter (OD) refractory lined Entyre portable rotary kiln with 42" X 42" refractory lined feed hopper.Includes a 9 MMBTU/hr...
$118,500
This unit is powered by a 40-hp Kubota V2203 diesel engine. Windrows up to 12' wide x 5' high in a two-pass operation. 6' wide x 7' high elevating face,...
$65,000
This unit is powered by a 95-hp Cat diesel engine. 9' x 7' elevating face. Remote controls allow for operation from cab. Material Handling, Tub Grinders, Waste...
$85,000
This unit is a Scat Model 4932 compost turner powered by a 140-hp Cat diesel engine with a 10' x 10' elevating face. Material Handling, Tub Grinders, Waste...
$55,000
ThisShar Systems Model DSCGK-50TNLFZ single-shaft mixer is powered by a 5-hp 230/460V electric motor and has a 1/4-cubic-yard capacity. It was used to...
$3,750
This keyed shaft is 7' 1" long for a Shred Pax AZ 80 shredder with a cutting chamber of 32" x 62".It is 4.5" in diameter with 60" hexagon section.
$3,850
SIERRA Model PN2700 Mobile Baler with Crane, powered by a Cummins Model 4TBA-3-9P 3 cylinder diesel engine. Charging box (open) is 2.700 mm long and 1.500...
$149,000
This 10'-6" long x 12" wide slider bed conveyor is powered by a 1/3-hp, 115 volt, single-phase electric motor and comes equipped with a 10" wide belt.
$900
This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 55-hp Isuzu diesel hydraulic power unit. The power unit is designed...
$28,500
This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 30-hp, 240/480 volt, three-phase explosion-proof electric motor. It...
$32,500
This mobile soil remediation unit is designed to clean on-site soils contaminated with petroleum hydrocarbons. The unit thermally evaporates petroleum...
$578,000
This unit is a SSI Model 2000-H slow-speed/high-torque shredder with a KYB MRHD-540 hydraulic drive powered by two 150-hp three-phase electric motors built...
$79,900
This unit is a Stearns 30" DC lifting scrap magnet - 230 V.D.C., 15.5 amps. Harness and chains included. Good condition.
$7,800
This surge hopper is approximately 2.5 cubic yards. The bin is 42" wide x 40" long x 72" deep with a 43-1/2" long x 8" wide discharge.
$6,500
This rotary valve is a Model 12 ROTO SEAL S.F. and is powered by a 3/4-hp, 208-230/460-480v electric motor. Openings are 12" x 12", and 12" in diameter.
$4,250
Thermal Oxidizer - 6' OD x 7' long oxidizing chamber with Zeeco Model BG1-125 10MMBTU Burner, System will include a combustion fan blower, chimney stack,...
$78,500
This heat exchanger is a Model UFX-26-5-HP-44, serial number SC17152, and has a surface area of 137 square feet. Plate material is 304SS, 0.5mm thick,...
$6,500
New Tuffman Model 722 Bag Breaker Trommel- 22' long x 7' diameter barrel with 30 12" spears bust evenly located throughout the barrel. Powered by a 10hp,...
$38,500
This rubber-sidewall incline conveyor is 6' long x 8" wide with the sidewalls, 5" wide without the sidewalls. It is powered by a .33-hp single-phase electric...
$2,700
This split-case, horizontal-mounted pump is a Model 4L1W-100-P26G-D powered by a 10-hp, 230/460 volts, 1170 rpm, three-phase electric motor. It comes...
$20,000
This is a WSM Model 48-6 Disc Screen, powered by a 5 hp 230/460V, 3-phase SM-Cyclo drive motor. It has 8 disc rolls on 11" centers with 6 discs per roll,...
$22,500
This unit is 6' x 22' long, with a 15' lump breaker, 6' screen, powered by 15-hp motor and dual shaft mount drive. Processes 10 TPH.
$44,000
This unit is a 7'x18' windrow, self propelled, powered by a 425-hp diesel engine. 4500 tons per hour capacity, 45 feet per minute, four wheel drive. ...
$120,000
This unit is in great condition with no repairs needed! Powered by anew John Deere diesel engine with less than 50 hours. This unit can be used for all...
$47,500
This unit is in good condition and is powered by a John Deere dieselengine. Less than 50 hours on new engine, newcontrols. Material Handling, Tub Grinders, Waste...
$44,000
This unit is in excellent shape, no repairs needed! Powered by a250-hp Cat 3208 diesel engine. Low hours,used for turning yard waste compost. Can be...
$60,000